Headphones Station

What help do you need?

Hardware Installation

  • install the Headphones Station on the left or right front leg of the pinball machine
  • attach the wiring under the cabinet
  • run it behind then inside the backbox
  • plug the wiring to the PLUS or NEO sound board

Headphones Station installation

On a Data East or System11 pinball machine, you must disconnect the CN3 connector from the PinSound board.

On a System11 pinball machine, you must disconnect the J2 connector from the PinSound board.

The Headphones Station will now act as the main volume control.

With a PinSound 1 board, you need to connect the extra adapter to “J2”.

Then connect the audio cable to “Headphones Linout”.

The Headphones Station is compatible with any standard pinball leg bolts spacing.

Installing the Headphones Station adds about 6mm (less that 1/4″) thickness.

How to use

Mute speakers

Speakers are automatically muted when headphones are connected If you own a PLUS sound board, you can choose to keep both speakers & headphones: set the switch “auto-mute" to OFF

Change sound pack

Prerequisite: multiple sound packs must be present on the flash drive

PinSound+ : you can change your sound package on-the-fly (if you have at least 2 different sound packages on the flash drive) by double turning (double tap) to the minimum (on the left) the Headphones Station knob

PinSound 1: you can change your sound package on-the-fly (if you have at least 2 different sound packages on the flash drive) by turning to the minimum (on the left) the Headphones Station knob

How to change sound package on PinSound+ board

Headphones Station

The volume of your machine, always at your fingertip. With your headphones, now you are playing.