PinSound’s amazing shaker and relay controller for pinball machines
200+ total trigger inputs
No technical skills needed
“Impact”, “Rumble”, “Explosion” etc… + unlimited customization
Topper, beacon, fog machines, light-saber…
Shaker activated at the right moment while playing
Master Effect: the new controller board included in the Standalone Edition
The Master Effect board works the same way as the PLUS/NEO board, without the sound part!
It’s connected to the CPU game and applies the shaker effects at the exact right moment.
Thanks to it, you can now add a shaker motor to any Bally / Williams / Data-East / SEGA / STERN pinball machines.
If you want only the shaker enhancement on your machine, without the sound experience upgrade, now you can have it!
With a PLUS or NEO sound board: everything is ready to install your shaker kit
On the Motion Control Shaker Kit for PLUS/NEO Edition, the PLUS/NEO sound board acts as the controller.
It’ll control the Motion Control board when to trigger a shaker event.
With a PLUS or NEO soundboard, you don’t need the Master Effect board, the work is done by the sound board itself!
So, if you already have a PLUS or NEO sound board, you can choose the Motion Control Shaker Kit and be ready to shake!
The Motion Control is a complete shaker kit designed to be easy to install. The Motion Control will drive the shaker motor with its dedicated chipset controller.
Upgrade your favorite pinball game (Bally Williams WPC, DataEast, Sega/Stern Whitestar) with a real shaker and enter another dimension while playing!
With the Motion Control Shaker kit, you’ll enjoy an immersive shaker experience thanks to the synchronized gameplay technology. It will shake exactly when needed and with the adequate vibration pattern. And you can even go further and easily define your own shaker settings in a few minutes!
Don’t forget to take advantage of the secondary “relay output” available on the Motion Control board, and control any extra electrical mod or device (beacon, fog machine, light-saber, etc…)
All pinball machines listed below are compatible with the Motion Control Shaker Kit: for PLUS/NEO and Standalone Edition.
Every compatible pinball machine has its own dedicated shaker settings ready to play.
You can define your own shaker events and tune the shaker behavior with the free software PinSound Studio Pro.
It’s easy to create a shakerization, it takes about 15 minutes and fine-tuning possibilities are unlimited!
Connect, control, synchronize your own external devices and mods
Motion Control board has a secondary “Relay Output” feature so you can control an extra mod or any electrical devices.
Control any device using from 5VDC to 110/230VAC volts
Activate your device on special game events
Choose your own triggers and customize running time with PinSound Studio Pro
Yes, it’s as simple as launching the program “PinSound Studio Pro” (free) and click on the events you want to modify. Save and play!
Like every PinSound product, the Motion Control Shaker kit is designed to offer a high and long-lasting quality.
It has been designed and manufactured to be the more resistant and reliable possible, it’s covered by a 2-years warranty and will be replaced if anything happens due to materials or manufacturing defects.
The installation takes only a few minutes, thanks to the colored easy-to-follow manual, provided with your Motion Control Shaker kit. You can also watch the installation videos we made to help you.
If you select a ready-to-play Shaker (check the list of “Supported pinball machine”, everything will work instantly. Else, within a few minutes you will be able to define your own shaker settings in the PinSound Studio Pro software.
You’ll get all the required wiring inside your Motion Control Shaker kit. The motor itself will be powered by the same power as if it was factory installed, thus, you don’t have to have a service outlet or install an external power supply.
We reply to every single questions, and we’re usually able to help PinSound users within 24h. We won’t let you down, whatever your question!
More than 10 years ago, Nicolas and Timothée, aka “The PinSound Brothers”, set themselves the challenge of designing a new sound board from scratch to improve the sound of their favorite pinball machine: The Twilight Zone.
Passionate about pinball machines since childhood and coming from a family of musicians, Nicolas and Timothée are trained engineers, respectively in software and hardware.
After two whole years of development and sleepless nights, the alliance of this shared passion and their technical expertise gave birth to the very first replacement sound board for pinball machines: the “PinSound Board”. The PinSound adventure was just beginning!
After a very enthusiastic reception from the community, the two brothers continued to innovate to offer even more products. Always with the same objective: to give you a totally new and immersive experience with your pinball machine.
In addition to new soundtracks, PinSound now offers products such as replacement CPU boards, shaker kits, speaker kits, headphone connectivity… These products are compatible with 150+ different pinball machines, including the latest STERN Spike pinball machines.
“Enhance your machine and start a new game!”
Don’t worry, your email won’t be spammed, sold, or shared with any third party.
And of course, you can unsubscribe at any time.
